Bylund Automotive Support

Hi,
I using the lampda shield 2 + Lambda Shield app for Windows + Lambda Shield 2 GUI code.

I want to measure the lampda and AFR on my methanol fueled Eberbacher heater.

Methanol has an 6,4:1 AFR at lampda 1.

What adaptations do I need to make in the Lambda Shield 2 GUI code? (because I presume it is set to petrol AFR 14:7).

I tried changing this in the:

//Local variables.
const float AirFuelRatioOctane = 6.40;

But I did not change anything?

Thanks in advance.

//Michael

Hello Michael, unfortunately the Lambda Shield apps (Windows, iOS, Android) are limited to AFR of 14.7.