Bylund LAMBDA Shield VER 1.
Posted: 22 Nov 2022 22:05
Hi Christian,
how are you,
I need to know a couple of things to jolt the old memory.
I still own a very early Version 1 Lambda Shield.
I have a new Laptop and i used the UNO i used to have my LAMBDA Shield on for another project.
So i no longer have the original ino. files for the Board or the file for the display.
I noticed that Ver 1 is no longer available.
So when i look at the Main Shield ino. download for the board and the ino. download for the display GUI i am unsure if they are applicable to my old board.
I am using an Arduino UNO and the SH1106 1.3" display.
I have tried to load the current Master shield ino which has the SD logger added and i have also tried the Lambda Shield GUI ino.
I add #include <U8g2lib.h> directly below #include <SPI.h> (I notice the SPI is orange in colour, but when i select the <U8g2lib.h> it is black.
Both sketches download to the board fine and i get no errors at all.
I connect the sensor up and plug 12 volts into the UNO as i have the shield jumper joined.
The sensor heats up and all seems happy, but i have no display at all.
I quickly loaded the default ADAFRUIT TEST file into the UNO to test the display and it works fine.
Can you let me know if both of the current GitHub ZIP files are compatible with my Series one LAMBDA SHIELD system?
Or when i am selecting the display am i selecting it incorrectly, i can't remember.
I go up to SKETCH, THEN INCLUDE LIBRARY, and scroll down to the U8g2 selection and click on it.
When i do this it puts my selection at the top of the sketch but i move it down below the following.
//Define included headers.
#include <SPI.h>
#include <U8g2lib.h>
Thanks for your time.
Kind Regards
Dave.
how are you,
I need to know a couple of things to jolt the old memory.
I still own a very early Version 1 Lambda Shield.
I have a new Laptop and i used the UNO i used to have my LAMBDA Shield on for another project.
So i no longer have the original ino. files for the Board or the file for the display.
I noticed that Ver 1 is no longer available.
So when i look at the Main Shield ino. download for the board and the ino. download for the display GUI i am unsure if they are applicable to my old board.
I am using an Arduino UNO and the SH1106 1.3" display.
I have tried to load the current Master shield ino which has the SD logger added and i have also tried the Lambda Shield GUI ino.
I add #include <U8g2lib.h> directly below #include <SPI.h> (I notice the SPI is orange in colour, but when i select the <U8g2lib.h> it is black.
Both sketches download to the board fine and i get no errors at all.
I connect the sensor up and plug 12 volts into the UNO as i have the shield jumper joined.
The sensor heats up and all seems happy, but i have no display at all.
I quickly loaded the default ADAFRUIT TEST file into the UNO to test the display and it works fine.
Can you let me know if both of the current GitHub ZIP files are compatible with my Series one LAMBDA SHIELD system?
Or when i am selecting the display am i selecting it incorrectly, i can't remember.
I go up to SKETCH, THEN INCLUDE LIBRARY, and scroll down to the U8g2 selection and click on it.
When i do this it puts my selection at the top of the sketch but i move it down below the following.
//Define included headers.
#include <SPI.h>
#include <U8g2lib.h>
Thanks for your time.
Kind Regards
Dave.