Bylund Automotive Support

We are happy to announce the Lambda Shield designed specifically for Arduino Uno.

The purpose of this device is to give students or hobbyists the possibility to connect a high resolution wideband oxygen (O2) sensor to their projects or assignments. Adding accurate data, such as the oxygen content in a closed loop control environment will help students or hobbyists to develop more efficient and environmentally friendly combustion based solutions. All the necessary software examples to get started is available on our GitHub page.

Watch the getting started video on YouTube: https://youtu.be/w3iuqttBrPI

Get you board now from the store.

Please like the video if you found it useful and subscribe for more.

Brilliant...this is one of the greatest lambda shield. But their a confusing schematic for connection from lambda shield pin to Arduino board pinout. I'm on my way making this wbo2 shield for fyp. Would you like to share the details.

farest wrote:Brilliant...this is one of the greatest lambda shield. But their a confusing schematic for connection from lambda shield pin to Arduino board pinout. I'm on my way making this wbo2 shield for fyp. Would you like to share the details.

Please refer to the schematics for the pins connecting the shield to the Arduino. The stackable headers are defined as X1, X2, X3 and X4. You are welcome to order a shield from the store for a better understanding of the design.