Hello
I have bought a Lambda Shield 2 wifi set.
Now I find on the info page 3 codes ( Lambda shield 2 example , Lambda shield 2 GUI and Lambda shield 2 smartphone).
Do I need to install them all 3 ?
And if yes how to exactly install 3 codes in an Arduino ? One after the other or copy/paste them all to one big code ?
Grts
Patrick
Arduino novice
-
Christian_Bylund
- Posts: 270
- Joined: 07 Mar 2015 18:09
Re: Arduino novice
Hi Patrick,
You can only use one or the other depending on what you want to do. The wifi one is the most limited one as it basically fills all the space with just the bluetooth library. For now you even need to use an older version to make it fit. See the troubleshooting section for details.
I recommend watching our YouTube videos.
You can only use one or the other depending on what you want to do. The wifi one is the most limited one as it basically fills all the space with just the bluetooth library. For now you even need to use an older version to make it fit. See the troubleshooting section for details.
I recommend watching our YouTube videos.
Best Regards,
Christian Bylund
Bylund Automotive AB
Christian Bylund
Bylund Automotive AB
Re: Arduino novice
Thx
I did see all the video's and read the manual.
The info is very basic.
The code is ok for the NB output as you said you needed some work on it ?
Please also explain the system behind the lookup table so I can adjust the mixture , as I already asked.
Grts
Patrick
I did see all the video's and read the manual.
The info is very basic.
The code is ok for the NB output as you said you needed some work on it ?
Please also explain the system behind the lookup table so I can adjust the mixture , as I already asked.
Grts
Patrick