Problem with ...2-Smartphone-Example

[Ries]

I have a genuine Uno wifi rev2 with a Lambda-shield-2. No problems with two of your examples ...-2-Gui-Example and ...-2-Example (with SD), they're running fine. But ...the third, ..-2-Smartphone-Example doesn't function. The heating doesn't start.
What can be the problem?

[Christian_Bylund]

I have a genuine Uno wifi rev2 with a Lambda-shield-2. No problems with two of your examples ...-2-Gui-Example and ...-2-Example (with SD), they're running fine. But ...the third, ..-2-Smartphone-Example doesn't function. The heating doesn't start.
What can be the problem?

Hello Ries,

What is the information you see on the app, is it possible for you to take a screenshot?

[Ries]

I hope this is the way to implement a picture. If not, it only shows 'No Signal' nothing else.
The lamda sonde doesn't warm up and the green leds on the shield don't light.

[Christian_Bylund]

I hope this is the way to implement a picture. If not, it only shows 'No Signal' nothing else.
The lamda sonde doesn't warm up and the green leds on the shield don't light.

Excellent, so it is not really a heating issue. Simply nothing seems to work. This is most likely because the firmware of your Arduino Uno WiFI (R2) is still using the stock firmware which is not compatible with the Arduino BLE libraries, it freezes. We have put this information in the troubleshooting section of this forum and on our social media channels, make sure to follow as we frequently update with information.

Click on the “Tools” menu and then open “WiFi101 / WiFiNINA / Firmware Updated” and follow the instructions. Make sure you click on Open Updater sketch and upload to the Arduino before pressing Update Firmware.

You can also find information about this on the Arduino website.

Do please let me know that this solves your problem and what you think about the app.

[Ries]

Your answer sent me in the right direction. It was a little more complicated than you wrote, but the Arduino page gave sufficient extra help and now everything is working properly.
I think that the way you're working, building and selling boards, publishing software for it, helping people to get things done and publishing the problems on this forum, is very educationable. I've already learned a lot. I especially thank you for the correct and fast answers.

[Christian_Bylund]

Your answer sent me in the right direction. It was a little more complicated than you wrote, but the Arduino page gave sufficient extra help and now everything is working properly.
I think that the way you're working, building and selling boards, publishing software for it, helping people to get things done and publishing the problems on this forum, is very educationable. I've already learned a lot. I especially thank you for the correct and fast answers.

Glad you got it working and thank you for the positive feedback. Automotive sensors are not always accessible to the public, we have learned this the hard way which is why we offer these products in an educational form. Hopefully there will be many more to come.