Lambda Shield on Arduino Mega

Fgodinho · Post by **Fgodinho** » 23 Oct 2019 16:29

Hello, I'm testing with the shield lambda ... is with 12v power on and jumper x7 connected,
but the power and heater LEDs do not light, what can it be ?

Christian_Bylund · Post by **Christian_Bylund** » 23 Oct 2019 17:55

Hello,

Could you please take a picture of the set up. Refer to which software you are using. And what sensor you are using.

What is the serial output?

I think we can sort this out.

Thank you.

Fgodinho · Post by **Fgodinho** » 28 Oct 2019 01:49

Hi Christian, I was trying to plug in a Mega Arduino and it didn't work, after I plugged in Uno it worked ...
Thanks a lot for the help...

Christian_Bylund · Post by **Christian_Bylund** » 28 Oct 2019 18:15

Good news, to use the Lambda Shield with Arduino Mega you need to reroute the SPI pins.

See example on our Instagram account.
https://www.instagram.com/p/BvZv4_GAOl2

Thank you.

Lambda Shield on Arduino Mega

Lambda Shield on Arduino Mega

Re: LEDs do not light

Re: LEDs do not light

Re: LEDs do not light