Lambda Shield 2 did not run successfully

Support forum for the Lambda Shield designed to connect Bosch LSU 4.9 wideband oxygen sensors to Arduino projects.
t2b
Posts: 7
Joined: 08 Mar 2021 20:54

Re: Lambda Shield 2 did not run successfully

Post by t2b » 30 Mar 2021 18:04

Hello Christian,
today the new Shield arrived, and now the sketch is running fine, with my Uno and with the delivered Uno Wifi (...via app) too.
Should I send you the old shield?

Many thanks for your friendly support...

Torsten

t2b
Posts: 7
Joined: 08 Mar 2021 20:54

Re: Lambda Shield 2 did not run successfully

Post by t2b » 31 Mar 2021 11:29

Hello Christian,

Yesterday the new Shield arrived, and it runs perfectly with my Uno. Connecting the UNO Wifi you delivered, works succsessfully too.
Should I send you the old Shield?

Many Thanks for your friendly Support.

Torsten

t2b
Posts: 7
Joined: 08 Mar 2021 20:54

Re: Lambda Shield 2 did not run successfully

Post by t2b » 31 Mar 2021 11:30

Ok, now there are two replies... ; )

User avatar
Christian_Bylund
Posts: 255
Joined: 07 Mar 2015 18:09

Re: Lambda Shield 2 did not run successfully

Post by Christian_Bylund » 31 Mar 2021 12:03

Hello Torsten,

Great to hear everything is now working as expected! The other shield is still puzzling me so I would very much want for you to return it. I will send you an email with instructions.

Thank you.
Best Regards,
Christian Bylund
Bylund Automotive AB

Post Reply