Compatibility of different models of LSU4.9

Support forum for the Lambda Shield designed to connect Bosch LSU 4.9 wideband oxygen sensors to Arduino projects.
Post Reply
Liuyanting
Posts: 2
Joined: 20 Jun 2020 23:41

Compatibility of different models of LSU4.9

Post by Liuyanting » 20 Jun 2020 23:53

I saw a LSU4.9 on the shopping website
The model is 0 258 017 269
Is it available in Lambda Shield?
Image
Image

User avatar
Christian_Bylund
Posts: 255
Joined: 07 Mar 2015 18:09

Re: Compatibility of different models of LSU4.9

Post by Christian_Bylund » 21 Jun 2020 15:40

Liuyanting wrote:
20 Jun 2020 23:53
I saw a LSU4.9 on the shopping website
The model is 0 258 017 269
Is it available in Lambda Shield?
Hi Liuyanting, it definitely looks like an LSU 4.9. I find no information on the internet about it. But I can tell you that it has the right connector. So I can not say by 100%, but most likely it is an LSU 4.9 and then it will be compatible with the Lambda Shields.
Best Regards,
Christian Bylund
Bylund Automotive AB

Dduc
Posts: 5
Joined: 15 Jul 2020 22:29

Re: Compatibility of different models of LSU4.9

Post by Dduc » 15 Jul 2020 22:37

Hi

I found the Mini Version of the LSU http://www.bosch-motorsport.de/content/ ... 38123.html

Do I have to change any software or hardware to use this version?

Regards

Daniel

User avatar
Christian_Bylund
Posts: 255
Joined: 07 Mar 2015 18:09

Re: Compatibility of different models of LSU4.9

Post by Christian_Bylund » 16 Jul 2020 00:14

Dduc wrote:
15 Jul 2020 22:37
I found the Mini Version of the LSU http://www.bosch-motorsport.de/content/ ... 38123.html
Hi Daniel,

Interesting question. According to the 2015 Bosch Motorsport price list the Mini-LSU 4.9 cost around 3.500 EUR. It is a bit out of the price range for evaluating compatibility by ordering one. If you have a Mini-LSU 4.9 sensor I will be happy to evaluate the compatibility for you.

Sorry for the inconclusive answer.
Best Regards,
Christian Bylund
Bylund Automotive AB

Dduc
Posts: 5
Joined: 15 Jul 2020 22:29

Re: Compatibility of different models of LSU4.9

Post by Dduc » 16 Jul 2020 06:48

Hi Christian

my project: a data logger and analysis software with which I can correctly adjust the carburetor of oldtimer motorcycles. Due to the limited space, the normal LSU 4.9 are very difficult to install

here it is for 112 €

https://www.turboloch.com/Bosch-Lambdas ... SU-49-Mini

Kind regards

Daniel

User avatar
Christian_Bylund
Posts: 255
Joined: 07 Mar 2015 18:09

Re: Compatibility of different models of LSU4.9

Post by Christian_Bylund » 16 Jul 2020 08:06

Dduc wrote:
16 Jul 2020 06:48
here it is for 112 €

https://www.turboloch.com/Bosch-Lambdas ... SU-49-Mini
Hi Daniel,

I am sorry to disappoint you but I think you are mistaken, that is not a Mini LSU 4.9. It is a standard LSU 4.9 for the Mini / Peugeot / Citroen, all using the same PSA engine. Search the part number 0 258 017 217 and you will see it is a standard LSU 4.9.
Best Regards,
Christian Bylund
Bylund Automotive AB

Post Reply