TristramBracey wrote: ↑

01 Jun 2021 12:51

What is the threaded connection size for the Bosch NOx sensor? Is it M18x1.5 as per the Lambda sensor?

Hi TristramBracey.

Unfortunately not, the standard for NOx-sensors is M20x1.5.

Thank you.

Hi Guys, By any luck would someone kept the v1.2.0 ? The current v1.3.0 with data logging is not needed for me, I'll log on the ECU directly and I'd have another use for the PWM output 9. Since I'm not a pro in coding, it would save me time and pain avoiding to have to understand and remove the add...

i have 11.8v and 12.6v engine not running Great Ali, then we know there is power on the shield from the power supply. is there any solution ? I will send you a new shield to test with, you will receive the tracking number by email. If it works you can return the old one for me to analyze. Thank you.

i measured the voltage while running. 12.4 V so should be fine. i changed the jumper but still nothing changed. There is no power to the Lambda Shield, the jumper will not affect that. http://www.bylund-automotive.com/support/images/Measure.png If possible please check if you have power on these po...

may be the lambda sensor is broken ? or your controller ? 0,1,10325,307,449,79,11161 0,1,10325,307,455,80,11168 Thank you Ali, 0,1, 10325 ,307,449,79,11161 10325 (0x28FF) is the status for no power. 0,1,10325,307,449, 79 ,11161 79 in this case shows that the Arduino is measuring 4.3V. Is there a pr...

Hello after using the code you send me it stuck at the logo. now neither my old code nor your code is loading. All codes are sticking at the logo. i now bought a new Arduino gem bird but it didn't help out. Still stuck at logo. I tested the code on my own device and it worked fine so do not change ...

allwinner wrote: ↑

24 Apr 2021 08:38

Would it be possible to include the engine speed in the application?

Thank you for the suggestion. Do you think it would be enough to support a 12V tach signal?

Hello Dave, Sorry for my late reply, it is always great to have your feedback as a professional user. The problems I see with the original Knock Shield: It is only compatible with Arduino Uno, not Arduino Mega nor Arduino Wifi. To give it full potential we need to input a tach / rpm signal. http://w...

yes standart code works fine. Great! Then I have just adjusted the output to show what you have requested, lambda and battery voltage. Let me know how this works for you. /* Example code compatible with the Lambda Shield 2 for Arduino and GUI frontend. Copyright (C) 2021 Bylund Automotive AB This p...

ronny wrote: ↑

20 Apr 2021 09:48

Hello Christian_Bylund,

thank you for your help thank you. just as you wrote it is.

It was my fault.

Problem solved

THX

Glad to hear it is sorted out, thank you.